Hand Stripping Furniture
|
Directions for HAND Stripping.
- Work with plenty of ventilation, safety goggles or glases, and skin protection. Stay out of the direct sun and stay protected from wind or strong drafts if working outside.
- Work in small areas starting at the top and working to the bottom of the piece. Apply a generous coat of gel remover. Brush on in one direction. Do not brush back and forth.
- Use soft wood scrapers and/or Steel Wool to remove crinkled finish and spent stripper.Repeat the above process until all layers of old finish are gone. On fine work, when the piece has all the finish gone and looks ready to refinish, go over it again with one last coat of stripper carefully working from top to bottom and removing stripper with Liberon #00 steel wool to ensure all traces of finish are lifted from the pores of the wood. Neutralize the wood surface by washing the piece down with Naphtha followed by Lacquer Thinner, if the piece is newer and in very good condition, a washdown with Lacquer Thinner may suffice.
- Let the stripped piece dry thoroughly for at least 24 hours to 48 hours for softer woods or pieces that required long soaking to clean off all the finish. Refinish promptly to seal and protect from humidity changes and environmental contamination.
HINTS & TIPS:
- Test to see if a through cleaning with Liberon's Wood Cleaner & Wax remover might eliminate the need to totally strip and refinish the piece.
- Use the right stripper for the finish being removed. (Determine finish type with solvents.)
- Use solvent washable strippers or paint removers.
- Avoid water washable removers to minimize grain raising, staining problems, and softening of glues or adhesives and the subsequent lifting of veneers and loosening of joinery.
- Avoid Metal Scrapers of any kind, wood fibers softened from the remover are easily compressed by hard metal edges. These sometimes apparently invisible `indents' can later show up after staining or even under clear coat finishes.
- DO NOT Sand a stripped surface. Sanding removes oxidized fibres, the natural distressing wear and ageing collectors refer to as patina. Upon refinishing uneven and splotchy effects result from the `windows' sanded into the surface. Often sanded areas of stripped wood will not take stain or finish the same as the unsanded part of the same piece. Therefore, for instance, sanding of a table leaf usually means sanding the entire top and remaining leaves. The surface was carefully prepared for the previous finish. Successful refinishing will be much easier if we disturb the wood the very least possible, in the finish removal process. If an area is badly damaged as to require sanding; proceed with care and be aware of the increased finish work that can be created by sanding. Lightly raised grain can in some cases be stained, sealed with sanding sealer, and then sanded instead of sanding on the bare wood.
- Partially strip (on Lacquers): On some pieces a top for instance might be all that really needs to be stripped and totally refinished. Proper cleaning and touch-up of dings, dents, and blemishes on sides or underpinnings with an overfinish of the existing finish might give a very professional result. In the right instance this can be a more profitable for the finisher and offer an affordable option for the customer.
- Use wax paper laid over the remover to slow evaporation and prolong working time. On difficult finishes and in drafty work areas each application of remover can then do more work.
- To lift paint or finish retained in the grain of open pored timber, despite repeated applications of remover, try the following. Let the surface dry for a day, apply a liberal coat of 1 pound cut shellac & and allow to dry throughly then try a coat of remover to lift the shellac and the adhered finish out of the pores. The wax paper trick above helps here also. On hard cases repeat the shellac and remover steps above if positive results come from the first application.
Refinishing
Stripped surfaces are always a little more problematic than finishing on new wood. Generally Pigment Wiping Stains are the best choice for coloring on the stripped surface. Lacquer shading stains and lacquer colorants blended into sanding sealer and build coats are a good bet for color correcting. Use amber lacquer on medium to darker woods or stains to give a richer and homogeneous continuity to the piece. On very light timber and on light colors use water -white lacquer or for the very clearest non-yellowing finish use CAB-Acrylic lacquer.
IMPORTANT:
PROTECT EYES and SKIN.
Always test products in an inconspicuous place to check compatibility and end results.
Companion Materials & Supplies:
- Safety Glasses or face shield for eye protection.
- Heavy duty rubber stripping gloves.
- Apron; preferably rubber or rubber coated.
- WOODEN scrapers (NOT putty knives or metal scrapers)
- Stripping BRUSH: stripper resistant plastic for getting into carvings and mouldig.
- STEEL WOOL:
- #0 or #1 for light clear finishes, #1 or #2 for paints, &
- #3 or #4 for very heavy built up layers of finish.
- Rags.
PRECAUTION:
Do not leave impregnated rags wadded or stacked in bundles as these can burst into spontaneous fire.
Dispose of rags and waste in accordance with local regulations; or lay rags out flat preferably outside, to dry so as to avoid any fire hazard.
About The Author
Steve Hattrick Proprietor 10 years experience
Konteaki Furniture Importers
http://www.hattrick-furniture.co.uk
|
|
|
Add Sizzle To Your Surroundings
Is your home décor lacking that extra something that spells the difference between comfortable and vibrant or between comfortable and...(related: Home Improvement)
Cleaning House And The 80-20 Rule
Cleaning house is one of those things that needs doing again... and again... and again! How can you make it less of a burden?When I taught time management classes, one of the things I loved to teach was the 80-20 rule. It's best explained by examples. Eighty percent of the time, you wear twenty percent of your wardrobe. Eighty percent of the...(related: Home Improvement)
Top Ten Air Purifier Questions
1. Do I really need an air purifier in my home?It depends on several factors, including your own comfort level and what the indoor air quality is in your home. There are several factors to take into consideration, however.
Home Remodeling: Colors And Temperature Perception
Colors contain underlying psychological meanings and evoke particular feelings when we see them. All of us have preconceived notions, learned from childhood memories and family customs concerning colors.Since our entire world is actually colorless, we only see color through light. Colors are simply wavelengths of light that we see. Color perceptions, however, change from culture to culture.Whenever you want to enliven a space, to provide a great background for yourself and your loved ones, or to enhance a desired emotional atmosphere, you should turn first to the use of color. Every color has some sort of influence on our emotions, eith...(related: Home Improvement)
Heart Of The Home
It started with my need for a new mixer. OK. Well, maybe not exactly. It probably really started when we bought our home in Connecticut two years ago. The kitchen needed a make-over. Not a complete renovation--as some do--but a make-over, to be sure. Its footprint was fine, as was its size. Windows and doors were good, too. But it was dreary. Dark, drab and dreary.But a re-do--no matter the scope--was out of our reach at move-in, just as it is now. So I've tried to not think about it too much.That's tougher than it sounds. What with me being a "visual person"--energized by color and proportion and pattern--and kitchen tours taking up space on every New England town's calendar within the next few ...(related: Home Improvement)
Make Your Hardwood Floors Shine
You have just installed hardwood flooring in your home. Now what? How do you keep your hardwood floors clean and shiny? Read the following Q&A in which two hardwood floor owners are asking just that.Q: "I was reading your site and saw that one should not use oi...(related: Home Improvement)
Cordless Impact Wrench - Not The Same Tool As Your Cordless Drill
The cordless impact wrench is quickly gaining in popularity among professional mechanics and the hobby mechanic as well. You may be thinking "I already have a cordless drill that I use for impact applications, why do I need a cordless impact wrench as well?". I thought the same thing. The first difference is on the inside. A cordless drill creates continuous in-line torque. A cordless impact wrench employs an internal spring-loaded pulsating cam to create rotational torque. This creates the "impact" force that loosens a nut. It is the equivalent to banging a wrench with a hammer to loosen a rusty nut only ...(related: Home Improvement)
Do You Know How To Use Window Coverings?
Window coverings serve an important role in your home,giving you privacy and also protecting your furniture anddécor from the harshness of prolonged, direct sunlight.But t...(related: Home Improvement)
Home Fire Prevention Effectiveness 1
Are you aware that you can lose all your personal belongings in a single fire?It's very sad when fire strikes your home. You lose everything. You do not have a chance to save many belongings. You will be considered lucky if you escape with your life.A person's home is a very private piece of his or her existence. People have been known to struggle for their entire life just to accumulate sufficient material riches and built comfortable shelters for themselves. We can experience a tremendous sense of loss if our homes have been razed to the ground by a fire.Fires know no bounds. We hear s...(related: Home Improvement)
The Art Of Gutter Cleaning
The gutters on your home are starting to overflow so it's time to clean the gutters on your home. Many homeowners do this project each year to properly maintain their homes. What you may not realize is that most gutter systems should be cleaned 3-4 times a year with each season. You may be wondering why should I clean out my gutters so often? The reason is each season trees go through various cycles that can clog up your...(related: Home Improvement)
Planning Permission Tips Uk - Two Story Side Extensions - The Common Mistakes
Probably the most common type of residential extension is the two storey side extension. However, it is one of the most easiest schemes to get wrong with regard to Planning Permission. Side extensions have an awful lot of issues that need careful consideration before submitting a scheme to the Planning Department for Planning Permission.Firstly is the impact of your scheme upon the neighbours. Most councils design guides will not let you build right up to the boundary at the first floor level. This is to prevent 'terracing' of the street scene. This usually means 'i...(related: Home Improvement)
The $27,000 Toilet Seat - Funny Diy Story
This story was told to me by a plumber I know and it brings home the reason why there are times to call a professional.I received a call from a homeowner asking for someone to come estimate some repairs. When I asked the sort of repairs, he said it would be too many to enumerate, but much easier if I just came out to the house and looked. I went. It began like this...Old Joe wanted to change his toilet seat, but couldn't get the old one off. So he tried wrenches until he rounded off the nuts (he was turning them the wrong way because they were upside down) and then decided to get his trusty cold chisel and hammer out. Well, he tapped a bit on it with no success, so he dre...(related: Home Improvement)
Asphalt Paving Driveway Maintenance Tips
Asphalt paving or Hot Mix Asphalt is typically what one thinks of when installing driveways of new homes. It is by far one of the least expensive methods for paving a surface in new home construction sites. Properly installed asphalt paved driveways have a life expect...(related: Home Improvement)
site-map - Copyright © 2007 | Contact Webmaster | All Rights Reserved | Free Articles and Information | Home Improvement