SBC DSL 2wire 2701hg Router Setup

If you are reading this document, you probably are searching for on how to set up your new SBC 2wire DSL modem. Throughout this document I will be using a 2wire 2700HG-B wireless modem, but this tutorial will also apply to other routers that 2wire provides Yahoo with. The first thing to do when setting up your 2wire DSL modem is plug the dsl filters into all your telephone jacks, where you plan having a phone. On one of the dsl filters, you should see a dual filter that reads touchtone phone and DSL/HPNA, on the side that says DSL/HPNA plug a phone line into this port, then run the other end of the phone wire into the phone port on the back of the 2wire dsl router.

Once you have connected the telephone cable, plug a ethernet cable into port 1 of the router, then connect the other end of the ethernet cable into your pc. Once you have made the connections between your computer and the router, and the router and the DSL filter. You can then plug in the power adapter into the modem, then plug the power adapter into the wall outlet.

Once the 2wire dsl router powers up, you should see a green light next to power, ethernet, and dsl. Once you see these lights turn green on your 2wire modem, the next that you need to do is open a web browser such as Internet Explorer. Once you see this window, press the next button, which should then ask you to download the 2wire dsl setup tool.exe. Once you have installed the 2wire DSL setup tool, the 2wire gateway authentication screen should open, simply select the yes button.

After you have validated you 2wire router, you must set a password to your router. I recommend setting a password with upper and lower case, with a few numbers for security reasons. This password will come in handy if you are trying to change settings on your 2wire router. To access the modem in the future to change any settings, simply type 192.168.1.254 into your web browser. As soon as you have set a password for your router, click the next button to begin registering your 2wire router with Yahoo.

As soon as you have registered your modem, read through the agreement then click I Agree button. As soon as you have accepted the agreement with Yahoo sbc yahoo DSL, you will need to create a user name and password for your DSL account. To begin setting up your new user name and password enter you land cable touchtone phone number that you have received from At&t.

Once you have created your new username and password, there will be another progress screen, then click the finish button. As soon as you have completed the about steps, close down your current browser and reboot your computer, this will resolve any network problems. As soon as you pc reboots open you web browser and being surfing the internet with your at&t 2wire dsl modem.

Article Source: http://www.free-article-info.com/ArticleDashboard

For more information on setting up your dsl router or cable router.

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated